Aesthetic Enhancement of the Gonial Angle and Inferior Mandibular Border in the Chinese Population.

BACKGROUND: The current absence of a standardized mandibular body osteotomy design poses challenges in surgical planning. Traditional approaches may not suit patients with wider anterior mandibles, potentially resulting in unsatisfactory outcomes. Addressing this issue requires a rational design that combines mandibular angle and body osteotomies for improved clinical practice. OBJECTIVES: In this retrospective cohort study we aimed to analyze mandibular computed tomography (CT) data with digital methods. The goal was to establish an integrated osteotomy design for both mandibular angle and body procedures and classify prevalent mandibular types in the Chinese Han population for surgical guidance. METHODS: Included were 89 patients who underwent mandibular angle osteotomy without genioplasty between 2016 and 2022 at Peking University Third Hospital. Mimics 21.0 software facilitated CT data reconstruction and osteotomy planning. Postoperative effects were assessed through imaging, complications, and surveys, leading to mandibular type classification. RESULTS: Mandibular angles were categorized by 3 types, based on osteotomy range. Type I involved mandibular body osteotomy only, type II mandibular angle osteotomy only, and type III both mandibular angle and body osteotomies. Distribution within the cohort was 2.25%, 8.99%, and 88.76% for types I, II, and III respectively. Patient satisfaction was high, with minor and major complications at 47.19% and 1.12% by Clavien-Dindo classification. CONCLUSIONS: Utilizing Mimics software, we established an integrated osteotomy design and categorized mandibular types. Findings offer valuable guidance for mandibular angle surgery and contribute to understanding of Asian mandibular morphology.

Alloplastic reconstruction of the mandible after subtotal mandibulectomy for medication-related osteonecrosis of the jaw: An update of the method.

BACKGROUND: Reconstruction of continuity defects following osteonecrosis in multimorbid patients is challenging. In all cases of the predescribed palliative treatment method for alloplastic mandible reconstruction, plate fractures were detected in follow-up. We hypothesized that a modification could avoid these fractures, leading to stable long-term results. METHODS: This retrospective study compares the original method with a modification using single, laser-sintered CAD-CAM plates instead of manually bent miniplates. The predescribed shuttering technique was used to reconstruct the mandible in its original shape with bone cement. RESULTS: Uneventful wound healing was observed in 86% of the cases after modification of the method. No implant or plate fracture occurred. CONCLUSIONS: The presented method should be considered as a treatment option for mandible reconstruction in elderly, multimorbid patients in palliative situations. The results of this study suggest that the modification of the method leads to significantly improved long-term stability. Donor site morbidity is avoided with this method of palliative surgery.

Redefining Mandibular Sub-units: The "ABC" Classification and Surgical Strategies for Lower Face Contouring.

BACKGROUND: In east Asia, lower face contouring surgeries including reduction mandibuloplasty and genioplasty are the most popular aesthetic craniofacial surgeries. Conventional selection of surgical strategies mainly relied on the visual judgment of the mandibular angle, without overall assessment of the mandibular sub-units. Furthermore, only a few studies offered quantitative assessment of the mandibular shape. METHODS: From 2010 to 2021, 1241 patients diagnosed with square faces and received customized lower face contouring surgeries by the senior author were reviewed and analyzed to propose an "ABC" classification system for facilitating surgical planning. RESULTS: Among them, 998 (80.42%) received bilateral mandible reshaping, 155 (12.49%) underwent bilateral mandible reshaping combined with genioplasty, and 88 (7.09%) received asymmetric mandible reshaping. A modified classification system composed of three critical parameters (height, morphology/thickness, divergence) in three aesthetic zones (mandibular angle, mandibular body, chin) was proposed based on quantitative summarization of the CT database and the senior author's 12-year experience. The way to facilitate surgical planning with this classification was demonstrated. CONCLUSIONS: This modified classification system ushered a decision-making process that prioritized several critical measurements and proposed an operative planning form. Meanwhile, it can also be cooperated into the three-dimensional virtual surgical plan. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors http://www.springer.com/00266 .

Impact of Mandibular Angle Osteotomy Using a Geometric Mathematical Design on the Aesthetic Osteotomy Line: A Retrospective Observational Study.

BACKGROUND: Mandibular angle osteotomy (MAO) is a frequently described technique in Eastern females. The success hinges on the precise positioning of the osteotomy line. The geometric mathematical method is viable. Therefore, we explored the impact of mandibular angle osteotomy using aesthetic standards and printed digital osteotomy templates (DOTs) on the aesthetic osteotomy line. METHODS: This retrospective observational study included female patients with prominent mandibular angle (PMA) who underwent MAO at our hospital between January 2020 and March 2021. Thirty-three female patients were included, 22 in the DOTs group using new DOTs, and 11 in the traditional group using traditional free-hand techniques. RESULTS: Regarding the width of the excised bone, the postoperative deviation from the preoperative plan was not significant in the DOTs group (0.5 ± 0.3 mm, P > 0.05), while the deviation was significant for the traditional group (2.5 ± 1.2 mm, P<0.05). The preparation time was longer in the DOTs group than in the traditional group (82 ± 11 vs. 53±4 min, P < 0.001). The osteotomy time and the operation time were shorter in the DOTs group than in the traditional group (osteotomy: 54 ± 5 vs. 73 ± 6 min; preparation: 124 ± 10 vs. 169 ± 13 min; both P < 0.001). The Likert (4.0 ± 0.5 vs. 1.0 ± 0.6, P = 0.006) and FACE-Q scores (17.5 ± 1.7 vs. 15.6 ± 1.3, P = 0.029) were higher in the DOTs group. CONCLUSIONS: The new method of positioning the new aesthetic osteotomy line based on geometric analysis might provide a possible osteotomy method that strongly suggests effectiveness, safety, individualization, and accuracy, with a shorter operation and higher patient satisfaction. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Surgical cutting guide and single plate fixation for intraoral vertical ramus osteotomy.

With the advancement of digital technology over the last few decades, the use of virtual surgical planning and fabrication of surgical guides have tremendously improved the outcomes of various maxillofacial surgical procedures. The intraoral vertical ramus osteotomy (IVRO) is an orthognathic surgical procedure largely employed for mandibular setback in correcting dentofacial deformities. This study describes the design and application of a surgical cutting guide for IVRO. The guide can also be used to facilitate the placement of miniplate fixation. The initial experience at the authors' centre suggests that the guide has allowed the osteotomy to be performed with increased precision and confidence. Furthermore, the use of miniplate fixation decreased the period of maxillomandibular fixation. However, a larger series is required to evaluate the utility of this system more thoroughly.

Straight-segment mandibulectomy: a reproducible porcine mandibular critical-size defect model.

Porcine mandibular defect models are commonly used for the preclinical evaluation of reconstruction techniques. Existing studies vary in technique, complexity, and postoperative outcomes. The procedures are complex and often described without sufficient detail. We describe in detail a simple and reproducible method for creating a critical-size mandibular defect in a porcine model. Seven hemimandibular critical size defects were created in five male Yorkshire-Landrace pigs, three with unilateral defects and two with bilateral defects. A transverse incision was made over the mandibular body. Periosteum was incised and elevated to expose the mandibular body and a critical-size defect of 30 × 20 mm created using an oscillating saw. The implant was inserted and fixed with a titanium reconstruction plate and bicortical locking screws, and the wound closed in layers with resorbable sutures. Intraoral contamination was avoided. Dentition was retained and the mental nerve and its branches preserved. The marginal mandibular nerve was not encountered during dissection. All pigs retained normal masticatory function, and there were no cases of infection, wound breakdown, haematoma, salivary leak, or implant-related complications. The procedure can be performed bilaterally on both hemimandibles without affecting load-bearing function. All pigs survived until the end point of three months. Postoperative computed tomographic scans and histology showed new bone formation, and a three-point bend test showed the restoration of biomechanical strength. Straight-segment mandibulectomy is a simple and reproducible method for the creation of critical-size mandibular defects in a porcine model, simulating a load-bearing situation.

Posterior Mandibular Segmental Split Osteotomy: A Novel Technique for Edentulous Space Reconstruction in Patients With Skeletal Class III Malocclusion.

ABSTRACT: This study presents an innovative surgery that successfully improved the facial profile and occlusal function of a patient with a skeletal Class III malocclusion and posterior hypodontia. The patient had chief complaints of missing teeth and a protrudedjaw. A novel 1-stage surgery referred to as posterior mandibular segmental split osteotomy combined with Le Fort i osteotomy and BSSRO was used because the patient wanted to save time and was worried about periodontal complications associated with other treatment methods. As a result, a satisfying facial profile and a Class I occlusion with a normal position of the posterior dentoalveolar segment of the mandible were achieved with no adverse effects. Thus, posterior mandibular segmental split osteotomy can be considered an effective treatment for skeletal Class III malocclusion with posterior hypodontia.

Expanded Transoral Microvascular Mandibular Reconstruction: A Scar-Free Approach.

PURPOSE: We present our experience with transoral segmental mandibulectomy, in conjunction with vascularized osseous mandibular reconstruction, utilizing an intraoral anastomosis and free of extraoral incisions. Virtual surgical planning and intraoperative navigation were used to help achieve this minimally invasive and scar-free approach. METHODS: A retrospective study was performed on 9 patients who underwent transoral segmental mandibulectomy followed by vascularized osseous reconstruction using an intraoral anastomosis between January 2018 and October 2018. The anastomotic recipient vessels were the facial artery and vein. The outcome variable was defined as the flap survival. Postoperative panoramic radiographs and computed tomography images were obtained for assessment of the neo-mandible. In addition, we performed a cadaver dissection to highlight relevant anatomic details of the facial artery and vein. RESULTS: Successful transoral segmental mandibulectomy was achieved in 9 patients, with an intraoral anastomosis successfully achieved in 8 patients. In one patient, an extraoral anastomosis was required because of challenging facial vein anatomy. Both recipient and donor sites healed uneventfully with a 100% successful rate of flap survival. In all cases, a well-positioned neo-mandible with good occlusion was demonstrated on postoperative imaging and examination. A symmetric facial appearance with no restrictions in mouth opening was also achieved in each case. In our cadaver dissection, we describe the anatomical course of the facial artery and vein. An average angle of 30° between these vessels is identified. CONCLUSIONS: Transoral segmental mandibulectomy combined with intraoral microvascular mandibular reconstruction is a surgically achievable technique with the benefit of being scar free.

Application of Segmented Template in Three-Dimensionally Guided Mandibular Angle Osteotomy.

BACKGROUND: The procedure of mandibular angle osteotomy (MAO) via an intraoral approach is challenging and experience-dependent due to the limited field of view and inadequate operational space. Uncertainty about the osteotomy line and plane can lead to severe complications. A three-dimensional printed guidance template based on a computer-assisted preoperative simulation is a potential solution to this problem. The current study aims to retrospectively investigate the feasibility and accuracy of using a custom-made segmented template to guide the osteotomy plane during the procedure. METHODS: Sixty patients who had segmented template-guided MAO were included in the study. Preoperative simulation using the custom-designed template and postoperative computed tomography were collected and parameters, including mandibular angle, gonion distance, and the mandibular plane angle were measured. A paired t tests and intraclass correlation coefficients (ICCs) were used to evaluate the efficacy, accuracy, and symmetry of the results. All complications were reviewed. RESULTS: The patients had a significantly larger mandibular angle and narrower gonion distance postoperatively. Preoperative simulations and postoperative outcomes were compared; ICCs were larger than 95% indicating significant agreement. Bilateral postoperative comparisons of the mandible also demonstrated excellent agreement (ICC > 95%). Numbness in the chin area was the most frequent complication but all recovered by 3 months postoperatively. CONCLUSIONS: The custom-made template can guide the osteotomy plane during the MAO procedure and achieve favorable accuracy and symmetry. Direct contact of the saw with the guidance template not only facilitates control of the osteotomy line but also the oblique angle of the osteotomy plane. This methodology may be a feasible and effective tool for mandibular contouring.

Assessment of an Artificial Intelligence Mandibular Osteotomy Design System: A Retrospective Study.

BACKGROUND: In this study, an AI osteotomy software was developed to design the presurgical plan of mandibular angle osteotomy, which is followed by the comparison between the software-designed presurgical plan and the traditional manual presurgical plan, thus assessing the practicability of applying the AI osteotomy software in clinical practices. METHODS: (1) Develop an AI osteotomy software: design an algorithm based on convolutional neural networks capable of learning feature point and processing clustering segmentation; then, select 2296 cases of successful 3D mandibular angle osteotomy presurgical plans, followed by using those 2296 cases to train the deep learning algorithm; (2) compare the osteotomy presurgical plan of AI osteotomy software and that of manual: first step: randomly selecting 80 cases of typical female head 3D CTs, and designing those 80 cases by means of AI osteotomy software designing (group A) and manually designing (group B), respectively; second step: comparing several indexes of group A and those of group B, including the efficiency index (time from input original CT data to osteotomy presurgical plan output), the safety index (the minimum distance from the osteotomy plane to the mandibular canal), the symmetry indexes (bilateral difference of mandibular angle, mandibular ramus height and mandibular valgus angle) and aesthetic indexes (width ratio between middle and lower faces (M/L), mandibular angle and mandibular valgus angle). RESULTS: The efficiency index: the design time of group A is 1.768 ± 0.768 min and that of group B is 26.108 ± 1.137 min, with P = 0.000; the safety index: The minimum distances from the osteotomy plane to the mandibular canal are 3.908 ± 0.361mm and 3.651 ± 0.437mm, p = 0.117 in groups A and B, respectively; The symmetry indexes: Bilateral differences of mandibular angle are 1.824 ± 1.834° and 1.567 ± 1.059° in groups A and B, respectively, with P = 0.278; bilateral differences of mandibular ramus height are 2.083 ± 1.263 and 2.965 ± 1.433, respectively, with P = 0.119 in groups A and B; Aesthetic indexes: M/L in groups A and B is 1.364 ± 0.074 and 1.371 ± 0.067, respectively, with P = 0.793; mandibular angles in groups A and B are 127.724 ± 5.800° and 127.242 ± 5.545°, respectively, with P = 0.681; Valgus angles in groups A and B are 11.474 ± 5.380 and 9.743 ± 4.620, respectively, with P = 0.273. CONCLUSIONS: With high efficiency, as well as safety, symmetry and aesthetics equivalent to those of a manual design, the AI osteotomy software designing can be used as an alternative method for manual osteotomy designing. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266.

Reduction Mandibuloplasty Along with Partial Masseter Muscle Resection: Masseter Muscle Response and Bone Regeneration.

OBJECTIVE: To compare the masseter muscle changes and bone regeneration between reduction mandibuloplasty along with partial masseter muscle resection and reduction mandibuloplasty alone. METHODS: Forty-seven patients who complained of prominent mandibular angle and hypertrophy masseter muscles (MMH) were divided into group 1 treated with reduction mandibuloplasty along with partial masseter muscle resection, and group 2 treated with reduction mandibuloplasty alone. Pre-5 days and long-term postoperative computed tomography data were collected, and the masseter muscle volume, hemi-mandible volume, and unilateral lower face width were measured. Patient satisfaction and complication were also evaluated. RESULTS: At long-term follow-up, group 1 showed a greater decrease in masseter volume (p < 0.001), and lower face width (p < 0.001), and less bone regeneration (p < 0.001) than group 2. Furthermore, patients in group 1 had higher satisfaction with the surgical outcome (p < 0.05). CONCLUSION: Reduction mandibuloplasty along with partial masseter muscle resection can achieve a slender frontal appearance and significantly decrease bone generation. For patients with MMH, reduction mandibuloplasty along with partial masseter muscle resection is an effective and predictable lower face reshaping surgery. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine Ratings, please refer to Table of Contents or online Instructions to Authors www.springer.com/00266 .

Association of Plate Contouring With Hardware Complications Following Mandibular Reconstruction.

OBJECTIVES/HYPOTHESIS: Despite considerable effort being dedicated to contouring reconstruction plates, there remains limited evidence demonstrating an association between contour and reconstructive outcomes. We sought to evaluate whether optimizing mandibular reconstruction plate contouring is associated with reduced postoperative hardware complications. STUDY DESIGN: Retrospective cohort study. METHODS: A cohort study was performed with adult patients (age ≥18 years) who underwent mandibulectomy and osseous free flap reconstruction following oncologic ablation at the University Health Network in Toronto, Canada, between January 1, 2003 and December 31, 2014. Patients with computed tomography scans performed within 1 year of reconstruction were included. Computer-based three-dimensional models were generated and used to calculate the mean plate-to-bone gap (mm). The primary outcome was plate exposure. Secondary outcome included a composite of plate exposure or intraoral dehiscence. Logistic regression models were fitted for each outcome accounting for other patient and surgical characteristics associated with the primary outcome. RESULTS: Ninety-four patients met inclusion criteria, with a mean age of 60.4 (standard deviation [SD] 14.9). The mean follow-up time was 31.4 months (range 3-94). Reconstruction was performed with fibular (57%) and scapular free flaps (43%). In the multivariable model, small mean plate-to-bone gap (<1 mm) was independently associated with 86% reduced odds of plate exposure (odds ratio [OR] 0.12; 95% confidence interval [CI] 0.02-0.55). Mean plate-to-bone gap less than 1 mm was also independently associated with reduced odds of developing a composite of plate exposure or intraoral dehiscence (OR, 0.29; 95%CI, 0.11-0.75). CONCLUSION: Optimizing plate contouring during mandibular reconstruction may decrease the development of postoperative hardware complications. LEVEL OF EVIDENCE: 4 Laryngoscope, 132:61-66, 2022.

Rare clear cell odontogenic carcinoma associated with impacted tooth in a young patient: case report and literature review.

Clear cell odontogenic carcinoma (CCOC) is a rare malignant odontogenic tumor. It is characterized by showing, on histopathological examination, clusters of vacuolated and clear tumor cells with epithelial differentiation surrounded by fibrocollagenous stroma and fibroblasts. The present study presents a rare clinical case of mandibular CCOC associated with an impacted tooth in a 26-year-old woman surgically treated with mandibulectomy and reconstruction with iliac crest bone graft. The patient has been followed up for 22 months without signs of recurrence. A search for case report/case series was carried out in the PUBMED database, as well as in the references of relevant previously published literature reviews. Ninety-six publications were identified, totaling 136 distinct cases reported. Female sex was the most affected (63.1%) with 63.3% of cases occurring in patients in the fifth, sixth, or seventh decades of life. The mandible was more affected than the maxilla (74.2%). Association of CCOC with impacted teeth was found in 2.4% of cases, thus rendering it a rare occurrence. The present case report corroborates the results of the survey regarding sex and anatomical location of the tumor; however, it contradicts the findings regarding age predilection. The case described is the fourth known occurrence of tooth impaction associated with the tumor and the first in a female. In conclusion, CCOC should be considered, as well as other malignancies, as a possible diagnosis of maxillary or mandibular intraosseous lesions even in unusual circumstances such as in association with impacted teeth and in young patients.

Acesso cirúrgico ao segmento cervical distal da artéria carótida interna e à bifurcação carotídea alta - revisão integrativa da literatura e proposta de protocolo / Surgical access to the distal cervical segment of the internal carotid artery and to a high carotid bifurcation - integrative literature review and protocol proposal

Resumo Diversas manobras já foram descritas para o acesso ao segmento distal cervical da artéria carótida interna ou à bifurcação carotídea alta; entretanto, há divergências na sistematização dessas técnicas. O objetivo deste estudo é revisar as técnicas descritas e propor um protocolo prático que auxilie na seleção da técnica mais adequada para cada caso. Para isso, foi realizada uma busca nas bases de dados PubMed Central, Biblioteca Virtual em Saúde e SciELO por artigos sobre o tema, em língua inglesa ou portuguesa, publicados entre os anos de 1980 e 2021. Entre as manobras descritas, parece razoável que as duas etapas iniciais sejam a abordagem ao músculo esternocleidomastóideo, seguida pela secção/retração do ventre posterior do músculo digástrico. Caso necessário, a subluxação mandibular temporária unilateral é um recurso adicional e preferível à divisão do aparato estiloide, devido ao menor potencial de morbidade. Exposições ainda mais amplas podem ser obtidas com as osteotomias mandibulares.

Abstract Several different maneuvers have been described for obtaining access to the distal cervical segment of the internal carotid artery or to a high carotid bifurcation. However there are different approaches to systematization of these techniques. The objective of this study is to review the techniques described and propose a practical protocol to support selection of the most appropriate technique for each case. The review is based on the results of database searches on PubMed Central, the Virtual Health Library (BVSalud), and SciELO for articles on the subject published in English or Portuguese from 1980 to 2021. Among the different maneuvers described, it appears reasonable that the first two steps should be to obtain access at the sternocleidomastoid muscle, followed by section or retraction of the digastric muscle posterior belly. If needed, temporary unilateral mandibular subluxation is an additional resource that is preferable to division of the styloid apparatus process, because of its lesser potential for morbidity. Even wider exposure can be obtained using mandibular osteotomies.

Changes in Pharyngeal Airway Space and Craniocervical Angle after Anterior Bimaxillary Subapical Osteotomy.

PURPOSE: This study explored the effects of genioplasty (Gep) and anterior subapical osteotomy of the maxilla and mandible (ASOMx+ASOMd) on the pharyngeal airway dimensions of patients with bimaxillary protrusion (BiP). METHOD: Thirty-two patients were divided into 2 groups. Group 1 received ASOMx+ASOMd, and group 2 received ASOMx+ASOMd+Gep. The cephalograms of the patients were collected before surgery and 2 months after surgery. Changes in the landmarks, related cephalometric angles (gonial, SN-GoGn, Y-axis, and SN-C2C4 angles), and 2 pharyngeal airway dimensions (uvulo-pharyngeal airway [UOP] and tongue-pharyngeal airway [TOP]) were analyzed. RESULTS: Before surgery, the parameters (incisor superius, incisor inferius, menton, most superior and anterior point of the hyoid bone, tip of the uvula, inferoanterior point on the second cervical vertebra, and inferoanterior point on the fourth cervical vertebra) and measured angles (SNA, SNB, ANB, gonial, SN-GoGn, Y-axis, and C4C2-SN) of both groups showed no significant differences. Following ASOMx, the patients in groups 1 and 2 exhibited a setback by 7.0 and 6.6 mm, respectively. After ASOMd, groups 1 and 2 exhibited 4.9 and 5.3 mm setbacks, respectively. No significant difference in the amount of setback was observed between groups 1 and 2. The postoperative horizontal and vertical positions of Me in group 2 were significantly forward by 6.1 mm and upward by 1.5 mm, respectively. Regarding pharyngeal airway dimensions, TOP was decreased in group 1 (1.7 mm) and group 2 (1.3 mm). In the postoperative Pearson correlation coefficient test, the horizontal and vertical positions of Me showed no significant correlation with TOP in both groups. Therefore, Gep did not prevent the reduction of TOP in group 2. CONCLUSION: After bimaxillary anterior subapical osteotomy, the TOP of patients with BiP was decreased, and this situation was unavoidable, regardless of whether Gep was performed.

Computer-assisted mandibular curved osteotomy: An automatic method to design the new aesthetic gonion and osteotomy line.

BACKGROUND: Digital technology has been widely used in mandibular curved osteotomy to improve accuracy. However, the planning process still highly dependent on the experience and judgement of the surgeon. This study describes an automatic method to design the new gonion and osteotomy line based on the aesthetic standards in attractive women, and assesses its clinical outcomes. METHODS: An automatic surgical planning method for mandibular curved osteotomy was developed based on our previous research of mandibular angle aesthetics. A prospective clinical study was conducted from April 2016 to April 2018. Twenty-five female patients with prominent mandibular angle were enrolled. Pre- and postoperative skull computed tomography (CT) was performed. Three-dimensional (3D) CT data were obtained and processed by Mimics 18.0. Surgical templates were designed according to the automatic surgical planning method and 3D printed for the surgery. Preoperative measurements, surgical simulation and postoperative measurements were taken to evaluate the surgical outcomes. RESULTS: There were significant differences between the preoperative and the postoperative groups' results (p < 0.01). There was no difference between the surgical simulation and the postoperative results. All postoperative measurements were consistent with aesthetic features of mandibles. Patients were satisfied with their outcomes in terms of outline, symmetry and lower facial width. CONCLUSIONS: Our study developed an automatic method to position the new aesthetic gonion and osteotomy line for prominent mandibular angle patients. We proved that this method is safe, effective and reliable.

Impact of CAD/CAM mandibular reconstruction on chewing and swallowing function after surgery for locally advanced oral cancer: A retrospective study of 50 cases.

OBJECTIVE: Computer-aided design and computer-aided manufacturing (CAD/CAM) techniques are increasingly applied to mandibular reconstruction, but the superiority of this method in oral food intake has not been well established. Considering the extent of mandibular defects, this retrospective study was aimed to clarify the impact of CAD/CAM mandibular reconstruction on chewing and swallowing function after surgery for locally advanced oral cancer. MATERIALS AND METHODS: We performed a retrospective review of 50 patients who had undergone segmental mandibulectomy with free flap reconstruction for locally advanced oral cancer. The patients' Functional Oral Intake Scale scores were measured at 3 months after surgery, and possible contributing factors including CAD/CAM mandibular reconstruction and the extent of mandibular defects for oral food intake were subjected to univariate analysis and multivariate logistic regression analysis. RESULTS: Multivariate logistic regression analysis showed that CAD/CAM mandibular reconstruction was independently associated with good oral intake, whereas both anterior or extensive mandibular resection and glossectomy were also independently associated with poor oral intake after surgery. CONCLUSION: The present study showed the positive impact of CAD/CAM mandibular reconstruction on chewing and swallowing function after surgery for locally advanced oral cancer for the first time.

Hemimandibulectomía por ameloblastoma multiquístico. A propósito de un caso / Multicystic ameloblastoma hemimandibulectomy. A propos of a case

RESUMEN El ameloblastoma es un tumor odontogénico benigno, localmente agresivo y recidivante, con predilección por la región posterior de la mandíbula. Se caracteriza por su agresividad local con muy baja tendencia a metastizarse. El objetivo fue reportar el caso clínico de un paciente con ameloblastoma multiquístico derecho, tratado a través de hemimandibulectomía. Se presentó un paciente masculino, de 44 años de edad, que refirió aumento de volumen del lado derecho de la mandíbula desde hacía aproximadamente un año, acompañado también de otros síntomas, atendido en el Servicio de Cirugía Maxilofacial del Hospital Militar Principal/Instituto Superior, en Luanda, Angola. Los estudios imagenológicos incluyeron radiografía panorámica y tomografía axial computarizada. El diagnóstico clínico patológico fue de ameloblastoma multiquístico. Este tipo de tumor requiere de un adecuado diagnóstico sobre la base de la presentación clínica, localización, tamaño, edad y tipo histológico; de ahí la importancia de conocer las características clínicas e imagenológicas, pues el tratamiento conlleva gran dificultad (AU).

ABSTRACT Ameloblastoma is a benign odontogenic tumor, locally aggressive and recidivist with predilection for back of the jaw, characterized by local aggressiveness and low tendency to metastasize. The aim was reporting the clinical case of a patient with right multicystic ameloblastoma treated through hemimandibulectomy. We presented a male patient aged 44 years, who referred a volume increase of the jaw right side for around a year, accompanied also by other symptoms; he attended the Maxillofacial Surgery Service of the Main Military Hospital/High Institute of Luanda, in Angola. The image studies included panoramic radiography and computerized axial tomography the clinical pathological diagnosis was multicystic ameloblastoma. This kind of tumor requires an adequate diagnosis based on the clinical presentation, location, size, age and histological kind, therefore the importance of knowing the clinical and image characteristics, because the treatment is very difficult (AU).

Inferior alveolar nerve reconstruction in extensive mandibular resection: Technical notes.

The inferior alveolar nerve (IAN) is a sensitive branch of the mandibular nerve innervating the lower lip, the chin, the buccal mucosa and the teeths. Lesions of the IAN are reported to occur in the 64,4% of maxillo-facial procedures, leading to anesthesia, hypoestesia and/or neurogenic discomfort. An extensive segment of the nerve can be moreover removed during mandibular resection for benign or malignant pathologies. Nervous grafts can be used in these cases to restore the nerve continuity. In order to optimize the procedure and to allow a concomitant mandibular osseous reconstruction, the Authors identified several standardized steps. The technique described allows to perform confortable and safe nervous anastomoses and to reduce the risk of damage and tension during the flap insetting phases.